Unofficial support for Configuration and Toubleshooting of Linksys Devices with latest updates.
This blog is not associated with Linksys in any means.
To configure a static IP on your Linksys Print Server, follow the steps below.
Select Fixed IP Address and enter the IP Address, Subnet Mask, and Gateway Address in the fields provided.
Click here for instructions on upgrading the firmware on Linksys devices.In this example the IP address “192.168.1.78”, the Subnet Mask “255.255.255.0 and the Gateway Address “192.168.1.1” were used.NOTE: Make sure the IP Address you’ll be assigning the Print Server has the same first 3 numbers as the IP Address and the last number can be any number between 2 and 99.For WEP Encryption, select Enable and for WEP Authentication, select Open System.
Type the same network key configured on the router, then click OK.A password may be required to access this information.